AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Active Member
WERNERSMITH1201
Posts: 7
Registered: ‎06-11-2009
Message 1 of 11 (10,121 Views)

Reverse alignment direction

10121 Views, 10 Replies
08-15-2010 11:55 PM

Can I reverse the direction of an existing horizontal alignment line in C3d 2011?

Valued Mentor
ralstogj
Posts: 608
Registered: ‎10-01-2006
Message 2 of 11 (10,110 Views)

Re: Reverse alignment direction

08-16-2010 03:04 AM in reply to: WERNERSMITH1201

Try typing

 

AeccReverseAlignDirection

 

at the command line. It use to be in the alignment menu not sure where it is on ribbon.

 

Regards

 

Justin Ralston

Regards

Justin Ralston
http://c3dxtreme.blogspot.com/
Distinguished Mentor
michael.robertson
Posts: 593
Registered: ‎03-18-2008
Message 3 of 11 (10,105 Views)

Re: Reverse alignment direction

08-16-2010 04:19 AM in reply to: WERNERSMITH1201

On the ribbon just click on the alignment you want to change and the Alignment tools tab appears, from that click Modify > Reverse Direction.269i3BF8484650E428C7

Mike Robertson
FL. Dept. of Transportation
CADD Applications Developer
Active Member
WERNERSMITH1201
Posts: 7
Registered: ‎06-11-2009
Message 4 of 11 (10,099 Views)

Re: Reverse alignment direction

08-16-2010 05:55 AM in reply to: WERNERSMITH1201

It does not get easier than that!!

Thank you very much for the help

Distinguished Mentor
michael.robertson
Posts: 593
Registered: ‎03-18-2008
Message 5 of 11 (10,096 Views)

Re: Reverse alignment direction

08-16-2010 05:58 AM in reply to: WERNERSMITH1201

Your welcome, the ribbon in 2011 is much better than before.

Mike Robertson
FL. Dept. of Transportation
CADD Applications Developer
Distinguished Contributor
demus72
Posts: 160
Registered: ‎09-07-2006
Message 6 of 11 (9,696 Views)

Re: Reverse alignment direction

04-18-2011 12:55 PM in reply to: michael.robertson

Just reversed an alignment using this tool, worked great.

 

My questions is, design profiles created 'by layout' do not update using the alignment reverse tool? Makes sense, but there doesn't appear to be a reverse tool on the ribbon when a profile is selected like there is for an alignment as you show in your screen capture. Do you know of a way to reverse a profile or have any other suggestions?

 

Thank you.

Valued Mentor
ralstogj
Posts: 608
Registered: ‎10-01-2006
Message 7 of 11 (9,683 Views)

Re: Reverse alignment direction

04-18-2011 02:23 PM in reply to: WERNERSMITH1201

To revserse the profile I have in the past copied the profile geometry from the geometry editor into Excel subtracted

the total chaninage off the wrong chainage and time by -1. Then from excel exported a profile txt file in the format

described in the Civil3d  help under "Format Requirements of Profile Files" and imported it back into civil3d. There maybe a better way now that some one knows but this got the job done for me.


Regards


Justin Ralston

http://c3dxtreme.blogspot.com/

Regards

Justin Ralston
http://c3dxtreme.blogspot.com/
Contributor
afunian
Posts: 15
Registered: ‎03-23-2011
Message 8 of 11 (9,652 Views)

Re: Reverse alignment direction

04-19-2011 12:40 PM in reply to: WERNERSMITH1201

It is very simple.

on drawing aria jast click on alignment you want to reverse it.

on the lower middle of ribbon clicl on MODIFY.

Then click reverse direction.

New Member
meera24
Posts: 1
Registered: ‎02-09-2012
Message 9 of 11 (9,054 Views)

Re: Reverse alignment direction

02-09-2012 02:59 AM in reply to: WERNERSMITH1201

I tried reversing but the alignment just does not reverse for some reason

 

 

Contributor
amalkawi
Posts: 12
Registered: ‎10-03-2012
Message 10 of 11 (7,065 Views)

Re: Reverse alignment direction

03-05-2013 10:33 AM in reply to: WERNERSMITH1201

I got mine reversed but it put my station numbers on top of the alignment. How do I bring it back under the alognment?

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.