AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
*Expert Elite*
doni49
Posts: 1,659
Registered: ‎12-22-2012
Message 1 of 3 (122 Views)

Renumber Tags (menu item -- PLURAL). Required to be one at a time?

122 Views, 2 Replies
02-07-2014 09:43 AM

C3D 2012

 

Select ONE SINGLE tag (Line & Curve label tag).  "Labels - General Segment Label" ribbon tab appears with a menu item "Renumber Tags".

 

But if I select more than one tag, this item is grayed out/disabled.

 

1) Is there someway to perform the command on a group of tags?  I removed one tag from the middle and want to decrement the rest of them by number.

2) If you're going to require this be done 1-at-a-time, wouldn't it make sense for this to be called "Renumber Tag"?

 

RenumberTags.png

Don Ireland



If a reply solves your issue, please remember to click on "Accept as Solution". This will help other users looking to solve a similar issue. Thank you.


Forum links:
AutoCAD 2013/2014/2015
AutoCAD 2010/2011/2012

AutoLISP, VB and other AutoCAD customization


Civil 3D General
Civil 3d Cusomization

*Expert Elite*
wfberry
Posts: 1,859
Registered: ‎09-05-2006
Message 2 of 3 (111 Views)

Re: Renumber Tags (menu item -- PLURAL). Required to be one at a time?

02-07-2014 10:06 AM in reply to: doni49

Yes, but if I remember correctly you do not have to start the routine over.

 

Bill

 

 

*Expert Elite*
doni49
Posts: 1,659
Registered: ‎12-22-2012
Message 3 of 3 (108 Views)

Re: Renumber Tags (menu item -- PLURAL). Required to be one at a time?

02-07-2014 10:11 AM in reply to: wfberry

It was still a PITA.  I had 50 tags that needed renumbered.  When I saw "Renumber Tags", I thought it would do them all.

Don Ireland



If a reply solves your issue, please remember to click on "Accept as Solution". This will help other users looking to solve a similar issue. Thank you.


Forum links:
AutoCAD 2013/2014/2015
AutoCAD 2010/2011/2012

AutoLISP, VB and other AutoCAD customization


Civil 3D General
Civil 3d Cusomization

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.