AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Distinguished Contributor
nostupidquestions
Posts: 470
Registered: ‎11-17-2005
Message 1 of 12 (794 Views)

renumber sheets

794 Views, 11 Replies
01-02-2013 12:26 PM

is there a way to renumber sheets in the sheet set manager? i've got over 100 sheets and i need to insert some new sheets in the middle. there wasn't a way in 2009 but i was hoping for something in 2012. it seems like something that would be included by now.

Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2015
Mentor
DSM_dude
Posts: 187
Registered: ‎03-08-2011
Message 2 of 12 (774 Views)

Re: renumber sheets

01-02-2013 01:42 PM in reply to: nostupidquestions

It will not automatically renumber them, but you can go in sheet set manager and change the sheet numbers.

Cad Blog:
http://geauxcad.wordpress.com/
Distinguished Contributor
nostupidquestions
Posts: 470
Registered: ‎11-17-2005
Message 3 of 12 (769 Views)

Re: renumber sheets

01-02-2013 01:46 PM in reply to: DSM_dude

thanks for the reply. i guess i should have included a 'quickly' or 'automatically' in my post in regards to renumbering. renumbering each sheet takes forever.

Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2015
*Expert Elite*
rkmcswain
Posts: 3,592
Registered: ‎11-13-2006
Message 4 of 12 (764 Views)

Re: renumber sheets

01-02-2013 02:00 PM in reply to: nostupidquestions

Nothing built in as you have seen (not sure why after all these years...)

But given enough programming knowledge, it's certainly possible to roll up your own routine.

We have such as tool and it pays for itself every time it is used.

*Expert Elite*
troma
Posts: 2,524
Registered: ‎05-21-2008
Message 5 of 12 (761 Views)

Re: renumber sheets

01-02-2013 02:02 PM in reply to: rkmcswain

How does this work if you have sheets numbered:

 

01

02

03-A

03-B

04

05

 

?

 

Or do you just avoid this type of numbering?


Credit where credit is due! Give kudos or accept as solution whenever you can.

Distinguished Contributor
nostupidquestions
Posts: 470
Registered: ‎11-17-2005
Message 6 of 12 (752 Views)

Re: renumber sheets

01-02-2013 02:17 PM in reply to: rkmcswain

i got one somewhere several years ago but it doesn't work with 2012.  i agree that this feature should be included.

Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2015
*Expert Elite*
Jeff_M
Posts: 4,483
Registered: ‎07-22-2003
Message 7 of 12 (746 Views)

Re: renumber sheets

01-02-2013 02:36 PM in reply to: nostupidquestions

There's also some 3rd party help if it's something you need.

Jeff_M, also a frequent Swamper
*Expert Elite*
Joe-Bouza
Posts: 5,127
Registered: ‎12-15-2008
Message 8 of 12 (728 Views)

Re: renumber sheets

01-02-2013 05:02 PM in reply to: troma

Nothing against SincPac, my favorite is SSMproperetieseditor at JTBworl dot com

 

and it more than renumbering

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
*Expert Elite*
rkmcswain
Posts: 3,592
Registered: ‎11-13-2006
Message 9 of 12 (714 Views)

Re: renumber sheets

01-03-2013 05:08 AM in reply to: troma

troma wrote:

How does this work if you have sheets numbered:

 

01

02

03-A

03-B

04

05

?


Our numbering is usually very simple (1, 2, 3, 4, etc) - so our routine simply starts with the first sheet (1) and then numbers the rest sequentially. It also updates a custom property with the total number of sheets since we have a field that references that.

New Member
marcobee
Posts: 1
Registered: ‎10-10-2014
Message 10 of 12 (70 Views)

Re: renumber sheets

10-25-2014 12:54 AM in reply to: rkmcswain

How can i make sure that my sheets are numbered in a good order considering that am using different files (i have set 5 sheets for each file). The other issue i want to ask is if there there is automatic way of editing datum for profile because i take much time to go through each sheet changing datum

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!