Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
i have drawing A that i created a surface in. i have drawing B that i am referencing the surface from drawing A into. i was able to work in drawing B all afternoon creating corridors, etc. i checked it in, went to check it out a little later and the referenced surface is broken. 2007 sp1a, using vault, let me know what else you need. thanks for any help your able to provide
What do you mean by broken?
Is the reference to the surface broken?
I've seen it happen when the original drawing or original surface get
renamed.
wrote in message news:5258655@discussion.autodesk.com...
i have drawing A that i created a surface in. i have drawing B that i am
referencing the surface from drawing A into. i was able to work in drawing
B all afternoon creating corridors, etc. i checked it in, went to check it
out a little later and the referenced surface is broken. 2007 sp1a, using
vault, let me know what else you need. thanks for any help your able to
provide
thanks for the suggestions, i'll keep that in mind. i discovered the problem...each workstation had a different working folder selected...makes sense after looking into it. thanks again.
Might be worth your while to investigate the force working folder switch.
I don't recall if that option is available after a vault is created but I know it's there when you create a vault.
thanks for the suggestion. i'm just now getting the design dept. up and running with 07 and vault and while doing some troubleshooting, i figured a central vault jobs folder on our main server would be less confusing, however, i forgot to tell this particular cad person to change the working folder selection, causing a slight panick on my part. i racked my brain all afternoon wondering what could be causing the problem. dont you work for GBA?
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")