We have a new version (2012) but STILL people are asking questions without giving their particular Version and SP and
perhaps 32 or 64 bit, Operating System.
It CAN make a difference. This is a friendly reminder.
Bill
(Jo-> I don't think a version is needed for this.)
@Anonymous wrote:With all the rain we have had (& Murph too, I assume) he may be employed as a sponge.
<G>
Bill
Or maybe designing Arks.
Allen
Allen Jessup
CAD Manager - Designer
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
12
Allen Jessup
CAD Manager - Designer
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
You know, the ark was a pretty good sized boat. At 300 cubits i length, and a "royal" cubit being in the neighborhood of 16 to 18" in length, the Ark could be as long as 450' - no small craft even today.
There is a dutch reproduction: http://www.pbase.com/paulthedane/noahs_ark
Reid
go up
Allen Jessup
CAD Manager - Designer
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
It looks like it's time to send this one up again. It makes it so much easier to give coherent answers when you have this information and a full explanation of the problem.
Allen
Allen Jessup
CAD Manager - Designer
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
^
Allen Jessup
CAD Manager - Designer
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Kudos for everyone
Joe Bouza
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
I think it's time for a bump.
@Anonymous wrote:We have a new version (2012) but STILL people are asking questions without giving their particular Version and SP and
perhaps 32 or 64 bit, Operating System.
It CAN make a difference. This is a friendly reminder.
Bill
(Jo-> I don't think a version is needed for this.)
In addition to bumping, might as well repost the original post 🙂
Oh special rules, I see
Joe Bouza
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Yeah. I must admit I'm getting to the point where I just blow by post that consist of just one sentence along the line of "My drawing doesn't display correctly after I regen".
Bad me!
Allen Jessup
CAD Manager - Designer
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Hello Matt,
Yes. I've seen that one before. Possibly you've posted it in the past.
Allen
Allen Jessup
CAD Manager - Designer
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Once more.