AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
*Expert Elite*
Neilw
Posts: 2,269
Registered: ‎09-04-2006
Message 1 of 13 (262 Views)
Accepted Solution

Quantity summary across multiple dwgs

262 Views, 12 Replies
11-14-2012 01:37 PM

I'm looking for suggestions on how to compile quantities for cost estimating when the data is scattered across multiple files. Aside from generating quantities for each drawing in seperate .csv files etc., is there some way to pull the data from all the drawings at once into a single summary file?

Neil Wilson (a.k.a. neilw)
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
http://www.sec-landmgt.com

Ah, young padawan, you must try again. QTO does recognize through an xref but you must ensure the pay item file is the same in both files:

 

http://screencast.com/t/zUiHt7NjMUw6 

*Expert Elite*
Joe-Bouza
Posts: 4,990
Registered: ‎12-15-2008
Message 2 of 13 (257 Views)

Re: Quantity summary across multiple dwgs

11-14-2012 01:41 PM in reply to: Neilw

You talking QTO or simple acad?

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
*Expert Elite*
Neilw
Posts: 2,269
Registered: ‎09-04-2006
Message 3 of 13 (256 Views)

Re: Quantity summary across multiple dwgs

11-14-2012 01:57 PM in reply to: Joe-Bouza

Ideally it would be with one tool but I don't think QTO can extract quantites from XREF's. I know we can use MAP report queries to extract data to .csv files but it won't work on C3D objects. There is the data extraction tool but I expect it has the same limitations.

 

I'm wondering if Infrastructure suite has tools for this or can we do it through DWF's?

Neil Wilson (a.k.a. neilw)
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
http://www.sec-landmgt.com
*Expert Elite*
Joe-Bouza
Posts: 4,990
Registered: ‎12-15-2008
Message 4 of 13 (242 Views)

Re: Quantity summary across multiple dwgs

11-14-2012 02:58 PM in reply to: Neilw

correct! only primitive. But I think you may be mistaken about the QTO across files? I haven;t looked at it in a while

 

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
*Expert Elite*
Neilw
Posts: 2,269
Registered: ‎09-04-2006
Message 5 of 13 (237 Views)

Re: Quantity summary across multiple dwgs

11-14-2012 03:22 PM in reply to: Joe-Bouza

QTO doesn't seem to recognize anything in XREF's Joe.

Neil Wilson (a.k.a. neilw)
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
http://www.sec-landmgt.com
*Expert Elite*
BrianHailey
Posts: 2,815
Registered: ‎04-27-2005
Message 6 of 13 (225 Views)

Re: Quantity summary across multiple dwgs

11-14-2012 03:58 PM in reply to: Neilw

Ah, young padawan, you must try again. QTO does recognize through an xref but you must ensure the pay item file is the same in both files:

 

http://screencast.com/t/zUiHt7NjMUw6 

Brian Hailey
CAD-1.com
My Blog
*Expert Elite*
Neilw
Posts: 2,269
Registered: ‎09-04-2006
Message 7 of 13 (218 Views)

Re: Quantity summary across multiple dwgs

11-14-2012 05:10 PM in reply to: BrianHailey

Excellent. Now, how can one determine what pay item files were used on the drawings?

Neil Wilson (a.k.a. neilw)
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
http://www.sec-landmgt.com
*Expert Elite*
Joe-Bouza
Posts: 4,990
Registered: ‎12-15-2008
Message 8 of 13 (209 Views)

Re: Quantity summary across multiple dwgs

11-14-2012 06:02 PM in reply to: Neilw

If I had to guess more than likely there either isn't or its different. And how come I didn't get the check :smileywink:

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
*Expert Elite*
Neilw
Posts: 2,269
Registered: ‎09-04-2006
Message 9 of 13 (205 Views)

Re: Quantity summary across multiple dwgs

11-14-2012 06:19 PM in reply to: Joe-Bouza

I guess you deserve some credit for thinking it was possible so here's a check (Kudo):smileywink:

Neil Wilson (a.k.a. neilw)
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
http://www.sec-landmgt.com
*Expert Elite*
Neilw
Posts: 2,269
Registered: ‎09-04-2006
Message 10 of 13 (196 Views)

Re: Quantity summary across multiple dwgs

11-14-2012 09:31 PM in reply to: BrianHailey

I can't find anything in the help system that states QTO works on XREF's. How did you learn about it Brian?

 

Another challenge: can we limit the extraction to the extents of clipped XREF's? I can't make that work.

Neil Wilson (a.k.a. neilw)
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
http://www.sec-landmgt.com
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.