AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Active Contributor
nathan07
Posts: 30
Registered: ‎06-14-2013
Message 1 of 4 (276 Views)
Accepted Solution

Proposed profile and existing surface not showing in Profile

276 Views, 3 Replies
06-17-2013 08:50 AM

I have a profile showing proposed storm sewer, existing sanitary, rock surface, existing surface, and proposed profile. Today for some reason the proposed profile and labels, and the existing surface are not showing on the profile and I'm not sure what has changed or how to get them back.

Is this a Profile in a plan and profile sheet and are data references being used?

 

If so see the solution to This post.

*Expert Elite*
Jay_B
Posts: 2,732
Registered: ‎09-15-2010
Message 2 of 4 (267 Views)

Re: Proposed profile and existing surface not showing in Profile

06-17-2013 09:11 AM in reply to: nathan07

Is this a Profile in a plan and profile sheet and are data references being used?

 

If so see the solution to This post.

Jay

C3D 2014 SP2
Win 7 Professional 64 Bit
Active Contributor
nathan07
Posts: 30
Registered: ‎06-14-2013
Message 3 of 4 (264 Views)

Re: Proposed profile and existing surface not showing in Profile

06-17-2013 09:21 AM in reply to: Jay_B
Yes Data sources are being used for the existing surface but the proposed
profile was drawn on the profile when I first created it. And the profile is
just in model space. The red line is the rock surface but there should be
the existing surface and the proposed profile above it.
Contributor
IVS2112
Posts: 11
Registered: ‎06-18-2013
Message 4 of 4 (222 Views)

Re: Proposed profile and existing surface not showing in Profile

06-18-2013 09:50 PM in reply to: nathan07

Dont worry,  If you 've the bak. up file of the drawing, problem wil be solved. 

 

waht's you version number??

any version.... you may goto the file option, select the DRAWING UTILITIES, then select the RECOVERY option.

 

then automaticallyy your old drawing file will be come back.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.