I have an alignment and profile created for a mteric project I am working on. The alignment is set up so it starts at 10+00 but when the profile is created the profile horiz axis starts at 100+00. Anyone have a clue what might cause this?
It could be the band style or the profile view axis style. Somewhere in there you have a text component set to have 100 before the 00. It will be one of the two places I suggested. We could tell you for sure if the DWG was attached.
well if anyone could take a look at the drawing and see if you see what the problem would be I would appreciate it. I cant figure it out. Thanks!
Your original post was:
"The alignment is set up so it starts at 10+00 but when the profile is created the profile horiz axis starts at 100+00. Anyone have a clue what might cause this?
This was not the case, the original Aligmnent station was 10+000 which for all practical purposes is 100+00 (displayed incorrectly).
Bill
Can't find what you're looking for? Ask the community or share your knowledge.