We have a profile view band style defined that displays a vertical line with
the EG elevation on one side of the line and the FG elevation on the
opposite side. I have noticed a problem with this. We normally set our
profile views to have 0 grids to the left and right of the profiles. When
the view is set this way, the band labels at the beginning and end of the
aligment are not displayed, even if the profile begins and ends at a major
or minor station increment. The only way that I have found to force these
labels to display at the beginning and end is to set the profile view so
that there is at least 1 extra grid to the left and right of the profiles.
Is there a way to do this without showing the extra grids? If not, this is
something that we would very much like to see in a future release.
Jon Rizzo
Langan Engineering and Environmental Services, Inc.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")