Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Hi,
I'm trying to set up a band style for my profile view. I have 3 profile elevations for a road that I want to show in the band - one for the EG centerline and two for two different offsets. See the attached jpg file for an example of what I'm describing. My question is - how do I set up the band style for 3 profiles? I only see Profile1 and Profile2. Is there any way to do this?
Perhaps you could create two seperate bands that overlap and then you can specify two profiles for one of the bands and the third profile to the second band.
That will work fine. Tip: Set the gap values to 0 in the profile view
properties, bands tab.
wrote in message news:5568424@discussion.autodesk.com...
Perhaps you could create two seperate bands that overlap and then you can
specify two profiles for one of the bands and the third profile to the
second band.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")