AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
*Ernst, Fred
Message 1 of 7 (124 Views)

Profile Label Style Request

124 Views, 6 Replies
10-21-2003 11:19 PM
Would you do a favor, and please include a FG Profile Label Style that
precisely duplicates what LDD 3 generates now in the Profile command(i.e.,
VC dimensioning, VC info, VC High\Low Point tick, Blocks used at PVI's, etc)
as a base to build from.

My clients, and I bet others' clients, have grown accustomed to this
format, and it would make the product transition that much more seamless.

With that as a base Style I will definitely also use the Civil 3D ability to
label and identify horizontal geometry on the Profile as further
enhancement.

Fred
*Mayo, John
Message 2 of 7 (124 Views)

Re: Profile Label Style Request

10-22-2003 12:04 AM in reply to: *Ernst, Fred
What has changed Fred??

Slow to change,
John Mayo

"Fred Ernst" wrote in message
news:smileyvery-happy:0ADEB2A1C7440DD2E3944B40B6437A3@in.WebX.maYIadrTaRb...
> Would you do a favor, and please include a FG Profile Label Style that
> precisely duplicates what LDD 3 generates now in the Profile command(i.e.,
> VC dimensioning, VC info, VC High\Low Point tick, Blocks used at PVI's,
etc)
> as a base to build from.
>
> My clients, and I bet others' clients, have grown accustomed to this
> format, and it would make the product transition that much more seamless.
>
> With that as a base Style I will definitely also use the Civil 3D ability
to
> label and identify horizontal geometry on the Profile as further
> enhancement.
>
> Fred
>
>
>
*Ernst, Fred
Message 3 of 7 (124 Views)

Re:

10-22-2003 12:05 AM in reply to: *Ernst, Fred
Well, it's kind of like Sheet Manager, just in the sense you have total
control of the Styles.


Fred
Valued Contributor
lbachman
Posts: 63
Registered: ‎11-19-2003
Message 4 of 7 (124 Views)

Re: Profile Label Style Request

12-17-2004 02:13 PM in reply to: *Ernst, Fred
Fred,

I agree. If the standard style had been the same as LDT then I wouldn't have spent several hours trying to duplicate the labeling I used to get right out of the box with LDT.

I was surprised that the standard label came up with only the VC distance. It was a pain finding how to add the other VC information.

Lisa
*Chakri Gavini
Message 5 of 7 (124 Views)

Re: Profile Label Style Request

12-18-2004 07:26 AM in reply to: *Ernst, Fred
Lisa, Out of the box, we shipped four (two for metric and two for imperial) templates. These templates have styles similar to LDT profile labeling, that might be of interest to you. Thanks Chakri Autodesk Inc. "lbachman" wrote in message news:32479175.1103321661300.JavaMail.jive@jiveforum1.autodesk.com... > Fred, > > I agree. If the standard style had been the same as LDT then I wouldn't have spent several hours trying to duplicate the labeling I used to get right out of the box with LDT. > > I was surprised that the standard label came up with only the VC distance. It was a pain finding how to add the other VC information. > > Lisa
*Don Reichle
Message 6 of 7 (124 Views)

Re: Profile Label Style Request

12-18-2004 05:05 PM in reply to: *Ernst, Fred
Hey Lisa; But then there are those who erased the K value and Algebraic Difference immediately after LDT produced them. The reasoning was/is that none of the agency checkers would understand what they were, and the surveyors wouldn't use them. Look at it this way... You were provided an opportunity to learn some of the intricate details of where things are stored, and how to manipulate them. -- Don Reichle "King Of Work-Arounds" Barghausen Consulting Engineers Kent, WA USA LDT3 - SP1/CD3 - SP1 On WIN2K SP4 Dell 1.6 Ghz P4 512MB RAM NVIDIA 32MB AGP "lbachman" wrote in message news:32479175.1103321661300.JavaMail.jive@jiveforum1.autodesk.com... > Fred, > > I agree. If the standard style had been the same as LDT then I wouldn't have spent several hours trying to duplicate the labeling I used to get right out of the box with LDT. > > I was surprised that the standard label came up with only the VC distance. It was a pain finding how to add the other VC information. > > Lisa
Valued Contributor
lbachman
Posts: 63
Registered: ‎11-19-2003
Message 7 of 7 (124 Views)

Re: Profile Label Style Request

12-23-2004 07:55 AM in reply to: *Ernst, Fred
Hi Chakri,

I guess I had better look at the templates. I was starting from a blank drawing so I was only getting the standard settings, which didn't have much.

Thanks for your reminder.

Lisa
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.