AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Member
eduardo.frias
Posts: 4
Registered: ‎09-24-2012
Message 1 of 9 (1,704 Views)
Accepted Solution

Profile elevation in alignment label

1704 Views, 8 Replies
09-25-2012 01:19 PM

Hi.

 

I need to know how to display a proposed profile elevation in the major station alignment label, I mean, for example, I want to read in the label "0+000, 494.444". I've already edited my major station label style adding a (profile type) Reference text, and it only displays "???". I suppose I need to associate it with the correct profile, but I've not figured out how to. I show you how the label looks in the attached image.

 

Does anyone have an idea?

 

 

Eduardo Frías

Monterrey, México

Not sure what types of labels you are using so try holding down the CTL key, select one or all of the labels. Go to the properties dialog and close to the top there is a field for the link. There is a little green icon to the left of that field. Double click it and then right click in model space. A dialog should appear. Now this is a bit of an odd procedure and I probably do not have it mapped out perfectly with the clicks here and there so play around and you should be able to get it.

*Expert Elite*
jmayo
Posts: 3,030
Registered: ‎11-13-2006
Message 2 of 9 (1,698 Views)

Re: Profile elevation in alignment label

09-25-2012 01:32 PM in reply to: eduardo.frias

Not sure what types of labels you are using so try holding down the CTL key, select one or all of the labels. Go to the properties dialog and close to the top there is a field for the link. There is a little green icon to the left of that field. Double click it and then right click in model space. A dialog should appear. Now this is a bit of an odd procedure and I probably do not have it mapped out perfectly with the clicks here and there so play around and you should be able to get it.

John Mayo, PE
IDSP 2014
Win 7 64, Xeon ES165@3.2Ghz,
64 GB RAM, Quadro K4000 (x2)
*Expert Elite*
Jeff_M
Posts: 4,519
Registered: ‎07-22-2003
Message 3 of 9 (1,696 Views)

Re: Profile elevation in alignment label

09-25-2012 01:36 PM in reply to: eduardo.frias

You must select each label using CTRL+Leftclick, then in the properties palette you can set the Profile to use. You don't have to edit one at a time, but you do have to select each one (CTRL+Window also works).

Jeff_M, also a frequent Swamper
Member
eduardo.frias
Posts: 4
Registered: ‎09-24-2012
Message 4 of 9 (1,675 Views)

Re: Profile elevation in alignment label

09-25-2012 03:48 PM in reply to: jmayo

Excellent!

 

I finally found the field. It seems so simple now!

 

Thanks a lot, John!

 

 

*Expert Elite*
Joe-Bouza
Posts: 5,188
Registered: ‎12-15-2008
Message 5 of 9 (1,673 Views)

Re: Profile elevation in alignment label

09-25-2012 03:53 PM in reply to: eduardo.frias

Also, if you save the style containg the profile reference label to a label set, when you load it to label and alignment you will be promted for the profile.

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
Contributor
KINGDAVID2
Posts: 21
Registered: ‎05-24-2012
Message 6 of 9 (1,621 Views)

Re: Profile elevation in alignment label

09-27-2012 03:39 AM in reply to: eduardo.frias

hi, i saw your message on this topic am having the same problem its only givin me ???, pls can you describe how to link the text to the profile

Active Contributor
jamesmac1200
Posts: 47
Registered: ‎04-23-2010
Message 7 of 9 (1,612 Views)

Re: Profile elevation in alignment label

09-27-2012 06:00 PM in reply to: KINGDAVID2

The reference text label style can be retrieved from two locations. One is the properties of the label. If you add the label and it shows the ???, just select the label and look at the properties. There will be a field at the top to select the applicable reference. By default, it should be blank. Just click in the blank area then select the appropriate reference. The second method is as you add the label, right click and a menu will come up to select the appropriate reference.

Civil 3D 2014 SP2
Intel Xeon CPU E5-1620 v2 @ 3.70 GHz
16GB RAM
64-Bit
Window 7 Professional
Contributor
KINGDAVID2
Posts: 21
Registered: ‎05-24-2012
Message 8 of 9 (1,606 Views)

Re: Profile elevation in alignment label

09-27-2012 11:51 PM in reply to: jamesmac1200
tanks for ur helpful contribution
*Expert Elite*
troma
Posts: 2,525
Registered: ‎05-21-2008
Message 9 of 9 (1,517 Views)

Re: Profile elevation in alignment label

10-30-2012 08:35 AM in reply to: Joe-Bouza

I can't get it to work when adding the label, only in the contrived manner described by Johnm, after the label appears.  Is this some sort of glitch?  It works so easily with profile geometry points, but really difficult to get it to work as profile elevations at regular stations.


Credit where credit is due! Give kudos or accept as solution whenever you can.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.