Hi all,
I have a label style that will give me the connected pipes on a structure.
However, I have some structures that have a drop from Inv In to Inv out of
greater than normal. The 'normal structures label properly. The greater than
normal do not give me any connected pipe information.
I have physically conected the pipes to the network by gripping it untul I
see the glyph to make sure that there is connectivity in the pipe network. I
also doulbe checked to see if any rule is causing this, but I can't see
anything out of the ordinary. See the attached pic for a (hopefully) better
illustration. CB-1 and 2 are okay. CB-3 has a larger than normal drop and
you can see that it has () after the Inv In- it should be (4).
If anyone has any ideas, please let me know.
--
Rick
C3D 2007 SP3
Dell DuoCore 2.66GHz 2GB Ram 256 Dual DVI Dual monitors!
🙂
Thanks,
Rick
coauthor Mastering Civil 3D 2012
I blog at http://simplycivil3d.wordpress.com