Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I am trying to have my profile bands contain existing and design profile info. Right now all that shows on my band style is two existing ground elevations.
For my components, EG is set to profile 1 and FG is set to profile 2. Where can I assign profile 1 & 2 to my profiles?
ekaraim wrote:
> I am trying to have my profile bands contain existing and design
> profile info. Right now all that shows on my band style is two
> existing ground elevations.
>
> For my components, EG is set to profile 1 and FG is set to profile 2.
> Where can I assign profile 1 & 2 to my profiles?
Profile Properties, Bands Tab - scroll all the way over to the right.
Go to the profile view properties. On the lower part of the band tab is a window showing the bands for the profile view. Scroll the window to the right and you'll see were Profile1 and 2 are spec'ed.
Stacking more bands will allow you to access to even more profiles as you can specify two for each band.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")