AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Member
jithukuttamath
Posts: 3
Registered: ‎11-02-2012
Message 1 of 4 (237 Views)

Problem with Creating Alignment

237 Views, 3 Replies
11-02-2012 11:21 PM

 I have a problem when i create an alignment with Select Object. The Chainage is not coming properly.

And here i attached the Print screen, please see that.

 

 

 

 

Distinguished Contributor
SurveyorLee
Posts: 128
Registered: ‎12-23-2008
Message 2 of 4 (217 Views)

Re: Problem with Creating Alignment

11-03-2012 09:59 AM in reply to: jithukuttamath

The screen shot looks good.  If there are gaps left in the alignment, check to be sure the poly line is one entity.  I have had it leave gaps before when i had a section that was at a different elevation.  I don't do much work with the alignments, but since it's Saturday and you are working, I thought I would give it a go.

 

Surveyor Lee

Distinguished Mentor
castled071049
Posts: 823
Registered: ‎11-15-2005
Message 3 of 4 (209 Views)

Re: Problem with Creating Alignment

11-03-2012 11:09 AM in reply to: jithukuttamath

What, exactly, is the problem? It looks fine to me, without seeing the alignment properties. 

*Expert Elite*
neilyj
Posts: 3,985
Registered: ‎08-01-2008
Message 4 of 4 (179 Views)

Re: Problem with Creating Alignment

11-04-2012 09:39 AM in reply to: jithukuttamath
nothing obviously wrong with this; any more clues?
neilyj
(No connection with Autodesk other than using the products in the real world)


IDSP Premium 2015 (mainly Civil 3D 2015 UKIE & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 500Gb SSD, 1Tb HDD
32Gb Ram Intel Xeon CPU E5-2650 v2 @ 2.6GHz (32 CPUs), ~2.6GHz
NVIDIA Quadro K4000, Dual 27" Monitor, Dell T5610
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.