AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Member
3 Posts
0 Kudos
Registered: ‎11-02-2012
Post 1 of 4

Problem with Creating Alignment

239 Views, 3 Replies
11-02-2012 11:21 PM

 I have a problem when i create an alignment with Select Object. The Chainage is not coming properly.

And here i attached the Print screen, please see that.

 

 

 

 

Distinguished Contributor
128 Posts
9 Kudos
Registered: ‎12-23-2008
Post 2 of 4

Re: Problem with Creating Alignment

11-03-2012 09:59 AM in reply to: jithukuttamath

The screen shot looks good.  If there are gaps left in the alignment, check to be sure the poly line is one entity.  I have had it leave gaps before when i had a section that was at a different elevation.  I don't do much work with the alignments, but since it's Saturday and you are working, I thought I would give it a go.

 

Surveyor Lee

Distinguished Mentor
823 Posts
37 Kudos
Registered: ‎11-15-2005
Post 3 of 4

Re: Problem with Creating Alignment

11-03-2012 11:09 AM in reply to: jithukuttamath

What, exactly, is the problem? It looks fine to me, without seeing the alignment properties. 

*Expert Elite*
4,049 Posts
343 Kudos
Registered: ‎08-01-2008
Post 4 of 4

Re: Problem with Creating Alignment

11-04-2012 09:39 AM in reply to: jithukuttamath
nothing obviously wrong with this; any more clues?
neilyj
(No connection with Autodesk other than using the products in the real world)


IDSP Premium 2015 (mainly Civil 3D 2015 UKIE & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 500Gb SSD, 1Tb HDD
32Gb Ram Intel Xeon CPU E5-2650 v2 @ 2.6GHz (32 CPUs), ~2.6GHz
NVIDIA Quadro K4000, Dual 27" Monitor, Dell T5610
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post