Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Problem with Creating Alignment

3 REPLIES 3
Reply
Message 1 of 4
jithukuttamath
334 Views, 3 Replies

Problem with Creating Alignment

 I have a problem when i create an alignment with Select Object. The Chainage is not coming properly.

And here i attached the Print screen, please see that.

 

 

 

 

3 REPLIES 3
Message 2 of 4

The screen shot looks good.  If there are gaps left in the alignment, check to be sure the poly line is one entity.  I have had it leave gaps before when i had a section that was at a different elevation.  I don't do much work with the alignments, but since it's Saturday and you are working, I thought I would give it a go.

 

Surveyor Lee

Message 3 of 4

What, exactly, is the problem? It looks fine to me, without seeing the alignment properties. 

Message 4 of 4
neilyj666
in reply to: jithukuttamath

nothing obviously wrong with this; any more clues?

neilyj (No connection with Autodesk other than using the products in the real world)
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature


AEC Collection 2024 UKIE (mainly Civil 3D UKIE and IW)
Win 11 Pro x64, 1Tb Primary SSD, 1Tb Secondary SSD
64Gb RAM Intel(R) Xeon(R) W-11855M CPU @ 3.2GHz
NVIDIA RTX A5000 16Gb, Dual 27" Monitor, Dell Inspiron 7760

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report