AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

New Member
Posts: 1
Registered: ‎10-01-2012
Message 1 of 3 (155 Views)

Polylines with FeatId

155 Views, 2 Replies
10-01-2012 09:48 AM



Is there anyway to read the featId attribute of a polyline and assign the elevation to the polyline? All the polylines are at elevation 0. Is there a lisp routine to do this?


PS: I do not have the shp file from GIS only the AutoCAD drawing with the polylines already created and their featId.


Thank you in advance for any input.

*Expert Elite*
Posts: 2,640
Registered: ‎12-18-2002
Message 2 of 3 (147 Views)

Re: Polylines with FeatId

10-01-2012 10:31 AM in reply to: Spike55

A few years ago I wrote a routine for a customer who wanted to do exactly what you describe. If you send the drawing, I can modify it work work for you.




Tim Corey, Owner
Delta Engineering Systems
Redding, CA
Autodesk Authorized Value-Added Reseller
*Expert Elite*
Posts: 6,004
Registered: ‎05-21-2003
Message 3 of 3 (139 Views)

Re: Polylines with FeatId

10-01-2012 11:03 AM in reply to: Spike55

You may still be able to use a Mapquery to query the polylines from that file and add the featid field as the elevation. Find instructions [HERE] in post #3. Ignore the expression for converting the elevation and only use the elevation stored in freatid.



Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.