Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I am working with C3D2010 and inserting regular points from the draw menu. When I assign an elevation to the point through the properties toolbar, it rounds up to the nearest 0.1 and I would like it to show a precision of 0.001 as I am working with meters. For example, I have an elevation that is 532.158, it shows in the properties that it is 532.2 and I would like to show 532.158.
Maybe I should have clarified which value I wanted more precise. It's the Position Z in the properties. I insert the points and then change their elevation at the properties location shown.
I went to where you had mentioned in the Ambient tab and the precision was already set to 3.
Edited by: jheinz5762 on Jan 19, 2010 9:07 AM
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")