In LDDT 2009, I was able to describe points like this: STK #32
But in Civil 3D 2013, whenever I use the # symbol, the description gets truncated. So, using the point description above, it will show up in Civil 3D 2013 as STK rather than STK #32.
Is this a setting or something that I can switch on so that the I can use symbols such as # and - in my point description?
Solved! Go to Solution.
Solved! by rkmin. See the answer in context.
I got it to work. I changed it to Raw Description, reimported the points and it showed up they way I wanted to.
Thanks for your help.
Are you using Description Keys? If so, check the Format column of the description key that is not working. Try setting that to $* and see if you get the # sign.
It's possible that you have Raw description being called rather than Full Description. Check the Contents of the Description component of your label style.
Access a broad range of knowledge to help get the most out of your products and services.
Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.
Upgrading to a 2015 product? Make sure to check these out 1st!