AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Active Contributor
hellafella
Posts: 27
Registered: ‎11-16-2009
Message 1 of 8 (931 Views)

Plan and Profile sheets left to right

931 Views, 7 Replies
04-06-2010 02:09 PM
I have generated a right to left profile

I use General-create the view frames and they show right to left --good

I use General-create sheets to create the layouts in my current drawing

Rather than being from left to right, it flips my plan view upside down and aligns it on the left side. Anyone run into this issue

Is their a viewport setting I don't know about?

Civil3d2010 bug?
*Himanshu Gohel
Message 2 of 8 (931 Views)

Re: Plan and Profile sheets left to right

05-25-2010 07:17 AM in reply to: hellafella
Hi,

You may be reporting a known issue, but first I want to make sure I
understand what you're saying:

On 4/6/2010 5:09 PM, hellafella wrote:
> I have generated a right to left profile

Do you mean "alignment" here, and not "profile?"

> I use General-create the view frames and they show right to left
> --good
>
> I use General-create sheets to create the layouts in my current
> drawing
>
> Rather than being from left to right, it flips my plan view upside
> down and aligns it on the left side. Anyone run into this issue

Can you post a small drawing that illustrates the problem?

--
Himanshu Gohel. Civil 3D Team, Autodesk, Inc.
Autodesk Civil 3D Product Information: http://www.autodesk.com/civil3d
Civil Engineering Community Portal: http://civilcommunity.autodesk.com
Active Contributor
hellafella
Posts: 27
Registered: ‎11-16-2009
Message 3 of 8 (863 Views)

Re: Plan and Profile sheets left to right

11-03-2010 09:37 AM in reply to: *Himanshu Gohel

Are you still wanting a drawing

New Member
moggert
Posts: 2
Registered: ‎06-13-2011
Message 4 of 8 (642 Views)

Re: Plan and Profile sheets left to right

06-13-2011 05:35 AM in reply to: hellafella

I have the same problem with a plan and profile when going right to left profile is right and the plan drawing is flipped upside down. Did you get a fix for this?

*Expert Elite*
Joe-Bouza
Posts: 5,189
Registered: ‎12-15-2008
Message 5 of 8 (639 Views)

Re: Plan and Profile sheets left to right

06-13-2011 06:10 AM in reply to: moggert

Sorry for asking the obvious question; are your alignments drawn right to left? If not I suspect thats why c3d is flipping

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
New Member
moggert
Posts: 2
Registered: ‎06-13-2011
Message 6 of 8 (637 Views)

Re: Plan and Profile sheets left to right

06-13-2011 06:15 AM in reply to: Joe-Bouza

Yes the alignment runs north to south 0+000 is north and station 25+000 is south

Member
Chris_Warren
Posts: 3
Registered: ‎06-10-2009
Message 7 of 8 (591 Views)

Re: Plan and Profile sheets left to right

07-15-2011 01:09 PM in reply to: hellafella

I'm having the same issue. I have a alignment that runs East to West. The View Frames are upside down and the sheets come into the Sheet Set in reverse order. I'm using C3D2010. Any fixes or workarounds for this?

Member
dedroy03
Posts: 5
Registered: ‎11-14-2013
Message 8 of 8 (218 Views)

Re: Plan and Profile sheets left to right

11-22-2013 05:51 AM in reply to: Chris_Warren

I am having the same issue as well. Any solutions yet? All I can think to do is create named views based on the boundaries of the view frames. But this will take a long time to do since I have multiple drawings, all with very long alignments. 

 

When I would "Create Sheets", I chose "Align profile and plan view at end". This seemed to fix my plan view, but then mess up my profile. It was working like that for a few days and now it no longer works and my 0+00 is at the left side of plan again instead of the right where I need it to be! (Reversing the stationing is not an option for me either)

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.