AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Valued Mentor
356 Posts
43 Kudos
Registered: ‎09-06-2011
Post 1 of 3
Accepted Solution

Plan and Profile Sheets - Help

881 Views, 2 Replies
12-05-2011 09:45 AM

Im creating some P&P sheets for a road I have. I have all the information, alignments, surfaces, profiles, etc.

 

I created View Frames, then Create Aheets. I put all layouts into one new drawing.

 

When I open the new drawing, the plan comes in fine, profile settings do not transfer, even though I specified that, in the sheets creation, it copy settings from the existing profile in my PLN drawing. 

 

Basically, I have a nice profile layout in my PLN drawing, but when it comes into my P&P sheet, it skyrockets my ht of profile from 40 (in my PLN) to 157 (in P&P).

 

Pictures attached, if that can help.

 

I'm running AutoCadd C3D 2012.

 

Thanks for the help.

 

-owenmull

-Owen
Windows 7 x 64 bit
NVidia Quadro K3000M Dual Monitor
32.0 GB RAM
Intel Core i7-3820QM @ 2.70 GHz
Civil 3D 2013 SP 2
______________________________________________________________
Usually, I find that the problem is between the keyboard and the chair.
Valued Mentor
326 Posts
59 Kudos
Registered: ‎06-21-2011
Post 2 of 3

Re: Plan and Profile Sheets - Help

12-05-2011 10:06 AM in reply to: owenmull
Valued Mentor
356 Posts
43 Kudos
Registered: ‎09-06-2011
Post 3 of 3

Re: Plan and Profile Sheets - Help

12-05-2011 10:18 AM in reply to: gjrcmb

Thanks, that was my exact problem! Why doesn't Autodesk ever fix this stuff?

 

-owenmull

-Owen
Windows 7 x 64 bit
NVidia Quadro K3000M Dual Monitor
32.0 GB RAM
Intel Core i7-3820QM @ 2.70 GHz
Civil 3D 2013 SP 2
______________________________________________________________
Usually, I find that the problem is between the keyboard and the chair.
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post