AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
*Expert Elite*
Joe-Bouza
Posts: 5,034
Registered: ‎12-15-2008
Message 1 of 4 (1,100 Views)
Accepted Solution

Pipe Styles

1100 Views, 3 Replies
03-23-2011 12:42 PM

I can't believe I haven't encountered this yet. I have a drawing with a couple of profiles and some pipe networks. One alignment is collinear with the pipe network and another crosses the networks. I want to show the pipe crossing as well as the longitudinal on it companion alignment. If I set the profile setting for the pipe display to show the pipes crossing I don't get the longitudinal and if I try to assign the different style to the crossing pipes the plan view disappears. So, how should I set my styles to get a crossing pipe and a longitudinal in the same file?

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS

Create a style for the crossing display. Assign this style to the pipe's Style Override in the ProfileView properties Pipe networks tab.

 

3-23-2011 1-08-54 PM.png

*Expert Elite*
Jeff_M
Posts: 4,426
Registered: ‎07-22-2003
Message 2 of 4 (1,094 Views)

Re: Pipe Styles

03-23-2011 01:11 PM in reply to: Joe-Bouza

Create a style for the crossing display. Assign this style to the pipe's Style Override in the ProfileView properties Pipe networks tab.

 

3-23-2011 1-08-54 PM.png

Jeff_M, also a frequent Swamper
*Expert Elite*
Joe-Bouza
Posts: 5,034
Registered: ‎12-15-2008
Message 3 of 4 (1,078 Views)

Re: Pipe Styles

03-23-2011 03:32 PM in reply to: Jeff_M

Perfect. I was lookig for something like that but couldn't see through my panic :smileyvery-happy:

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
Active Contributor
cfiorica
Posts: 34
Registered: ‎05-18-2009
Message 4 of 4 (656 Views)

Re: Pipe Styles

07-19-2012 10:33 AM in reply to: Joe-Bouza

This also helped me with a different problem I was having (so far at least).  I would change the pipe style to my XING pipe style, save and leave the drawing.  When I opened the drawing...all my xing's had changed back to a non-xing style!  I tried it with the override and so far the styles seem to stick.  This tip would have come in handy on another drawing long since gone now.  Thanks!

Carl M. Fiorica, P.E., LEED A.P.
Burkett and Wong Engineers
3434 4th Ave
San Diego, CA 92103
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.