AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Valued Contributor
emelendez
Posts: 60
Registered: ‎07-01-2011
Message 11 of 12 (129 Views)

Re: Pipe Structure Rim insertion

04-12-2012 09:42 AM in reply to: Jeff_M

I had that happen as well. I noticed that it was because the parts list had been carried over through several versions of civil 3D. I believe it started from 2007 Civil 3D. So I did the same as you and started from the begining and recreated all my parts and rules. It took a while but it fixed all the errors. Before I did it, I tried going through all the routines that are set up to convert the old stuff into the new format, but it was still giving me problems.

Edwin Melendez
AutoCAD Civil 3D 2013 Certified Professional
Certification No. 00319327
Distinguished Contributor
rrawls
Posts: 103
Registered: ‎09-07-2006
Message 12 of 12 (125 Views)

Re: Pipe Structure Rim insertion

04-12-2012 11:00 AM in reply to: emelendez

Thanks for all of the replies. I was able to workaround by swapping parts (finally was able to do that). I simply used NO FRAME structures and all of my structures defaulted back to my finished grade for the rim elevations.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.