AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Mentor
rwatson654
Posts: 285
Registered: ‎06-27-2008
Message 1 of 4 (448 Views)
Accepted Solution

Pipe Structure Label

448 Views, 3 Replies
05-13-2011 07:02 AM

Trying to setup pipe structure labels similar to the way the company "has always done them".  I'm having trouble with the leader appearance in the dragged state.  On the attached image the top is what I'm getting, the bottom is what I want.  Can this be done?

Civil 3D, 2009

Win 7 Enterprise 64bit

8 GB

 

Yeah it can be done, your image shows the leader going to the text, you must have your block achored to your text (middle center).  Try anchoring your text to the block and set the attahcment point on the block to middle right.  That way the leader will go to the block.  That label will be used for label being placed to the left of the structure.  Make a copy of the label and adjust the attachement point on the block to middle left, this label will be placed on the right of the structure.  Make sure your dragged state display is set to As Composed.

Valued Mentor
Valued Mentor
sjg
Posts: 534
Registered: ‎09-29-2010
Message 2 of 4 (442 Views)

Re: Pipe Structure Label

05-13-2011 07:44 AM in reply to: rwatson654

Yeah it can be done, your image shows the leader going to the text, you must have your block achored to your text (middle center).  Try anchoring your text to the block and set the attahcment point on the block to middle right.  That way the leader will go to the block.  That label will be used for label being placed to the left of the structure.  Make a copy of the label and adjust the attachement point on the block to middle left, this label will be placed on the right of the structure.  Make sure your dragged state display is set to As Composed.

Steve Goessling
Land Consultants
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
Mentor
rwatson654
Posts: 285
Registered: ‎06-27-2008
Message 3 of 4 (426 Views)

Re: Pipe Structure Label

05-13-2011 09:27 AM in reply to: sjg

that worked thanks.

Active Member
stupidnguyen
Posts: 6
Registered: ‎04-04-2011
Message 4 of 4 (373 Views)

Re: Pipe Structure Label

05-26-2011 04:39 AM in reply to: rwatson654

You can follow the link to download the template of the label manhole. I think it's helpful for you!

 

[IMG]http://i1132.photobucket.com/albums/m570/stupidnguyen/Untitled-1.jpg[/IMG]

 

http://www.mediafire.com/?dscmy95o0ua6z80

 

Have anyone think about this picture

 

[IMG]http://i1132.photobucket.com/albums/m570/stupidnguyen/7.jpg[/IMG]

Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.