AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Mentor
184 Posts
27 Kudos
Registered: ‎06-09-2007
Post 1 of 6
Accepted Solution

PIPE INVERT Direction

869 Views, 5 Replies
01-11-2013 12:46 PM

Hello,

I have a style for labeling pipe inverts for a network which includes the direction of the pipe connections.

Some of the labels are on the wrong side, i.e. the East invert is on the left, the West is on the right. (see attached).

Is there a way to reverse these?

 

Any  help appreciated.

Only solution I have had is to make two label styles: one with incoming then outgoing and the other with outgoing then incoming.  If you have a structure with flows coming in both sides and flowing out in the middle (perpendicular to the profile) then you're out of luck.

If you've used the "Label for each" or whatever it's called, the labels will appear in the order in which they were attached to the structures.  Detach them from the structure and then reattach them in the order you want them to appear.

*Expert Elite*
2,543 Posts
267 Kudos
Registered: ‎05-21-2008
Post 2 of 6

Re: PIPE INVERT Direction

01-11-2013 12:55 PM in reply to: doben

Only solution I have had is to make two label styles: one with incoming then outgoing and the other with outgoing then incoming.  If you have a structure with flows coming in both sides and flowing out in the middle (perpendicular to the profile) then you're out of luck.


Credit where credit is due! Give kudos or accept as solution whenever you can.

*Expert Elite*
2,804 Posts
288 Kudos
Registered: ‎07-09-2003
Post 3 of 6

Re: PIPE INVERT Direction

01-11-2013 02:28 PM in reply to: doben

If you've used the "Label for each" or whatever it's called, the labels will appear in the order in which they were attached to the structures.  Detach them from the structure and then reattach them in the order you want them to appear.

Matt Kolberg
Cansel - Autodesk Division
http://www.cansel.ca/
*Expert Elite*
2,543 Posts
267 Kudos
Registered: ‎05-21-2008
Post 4 of 6

Re: PIPE INVERT Direction

01-28-2013 11:02 AM in reply to: mathewk

Any suggestions for when you have two profiles of the same structure?  eg an East-West street and a North-South street intersection.  Say the outlet is to the South.

For the East-West profile I want to see the inverts in this order:  W, N, S, E.

For the North-South profile I want to see the inverts in this order:  S, W, E, N.


Credit where credit is due! Give kudos or accept as solution whenever you can.

Member
5 Posts
0 Kudos
Registered: ‎08-22-2007
Post 5 of 6

Re: PIPE INVERT Direction

03-25-2013 08:06 AM in reply to: troma

Hi Troma,

 

Did you ever get the invert order you explained figured out. We have been trying to find a solution but havn't figured one out to date.

 

Nathan

*Expert Elite*
2,543 Posts
267 Kudos
Registered: ‎05-21-2008
Post 6 of 6

Re: PIPE INVERT Direction

03-25-2013 08:14 AM in reply to: nduimering

If the outlet is to the right or to the left you can do it as described above.  But if it's in the middle it's a no-go.

 

Unless, I guess you could have more label styles set up, and use matthew's suggestion for when it in the centre, and my previous suggestion for when it is right or left....hmm I'll have to look into this.


Credit where credit is due! Give kudos or accept as solution whenever you can.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are you interested in helping shape the future of the Autodesk Community? To participate in this brief usability study, please click here. Your time and input is greatly appreciated!