AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Contributor
ingegneria
Posts: 19
Registered: ‎07-18-2013
Message 1 of 4 (190 Views)
Accepted Solution

Pipe in profile view

190 Views, 3 Replies
03-04-2014 08:51 AM

This is my first time with pipes and I'm quite sure that I'm missing something.

I have a road crossing a river and I want to show the pipe in the profile view but when I add it to the view It doesnt look like I would expect. I mean, If I had an orthogonally crossing, the pipe in the profile view should appear like a circle, but it doesn't. Inthe same way, if the crossing is oblique I should see an ellipse.

Where I'm wrong?

The pipe display is controlled by the style that is assigned to the pipe.  Create a "crossing pipe" style.  On the Display tab, set the view direction to profile.  then toggle on the display of the Crossing pipe components, and toggle off the others.

CrossingPipeStyle.jpg

 

You can assign this style directly to the pipe object, or as an override style , in the profile view properties. 

*Expert Elite*
Jay_B
Posts: 2,432
Registered: ‎09-15-2010
Message 2 of 4 (178 Views)

Re: Pipe in profile view

03-04-2014 09:36 AM in reply to: ingegneria

A picture would be helpful, can you post a screen capture of the pipe plan layout and what your seeing now in profile view?

Jay

C3D 2014 SP2
Win 7 Professional 64 Bit
Contributor
ingegneria
Posts: 19
Registered: ‎07-18-2013
Message 3 of 4 (138 Views)

Re: Pipe in profile view

03-05-2014 12:13 AM in reply to: Jay_B

Maybe my english is not so good. Anyway, I attacched the plan and the profile view: I used a circular pipe (diameter 1800), so I would expect a circular pipe, with the right size, in the profile view.

Valued Mentor
david.zavislan
Posts: 268
Registered: ‎10-31-2006
Message 4 of 4 (118 Views)

Re: Pipe in profile view

03-05-2014 08:09 AM in reply to: ingegneria

The pipe display is controlled by the style that is assigned to the pipe.  Create a "crossing pipe" style.  On the Display tab, set the view direction to profile.  then toggle on the display of the Crossing pipe components, and toggle off the others.

CrossingPipeStyle.jpg

 

You can assign this style directly to the pipe object, or as an override style , in the profile view properties. 

David Zavislan, P.E. | Wood Rodgers, Inc.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.