AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Valued Contributor
KevinSpear_PE
Posts: 70
Registered: ‎04-09-2009
Message 1 of 3 (396 Views)

PDF viewport layer control

396 Views, 2 Replies
03-07-2012 09:25 AM

If you have more than one PDF overlay, you might put them on separate layers.  Generally speaking in this case, the PDF extents overlap so when i plot different sheets, I would want only a single PDF to be visible.

 

So, my first thought was to freeze the layers of unwanted PDFs in the viewport.  Except, once i did that, nothing happened.  So, i guess i have to manually freeze the layer when plotting each sheet?  I then can't publish the layouts as the appropriate PDF's won't be visible.

 

Anyone have ideas?

 

Thanks

Kevin

*Expert Elite*
sboon
Posts: 2,226
Registered: ‎11-08-2005
Message 2 of 3 (378 Views)

Re: PDF viewport layer control

03-07-2012 12:13 PM in reply to: KevinSpear_PE
Valued Contributor
KevinSpear_PE
Posts: 70
Registered: ‎04-09-2009
Message 3 of 3 (374 Views)

Re: PDF viewport layer control

03-07-2012 12:16 PM in reply to: sboon

If they were used all at the same scale, that would work. I have 2 at one scale and 3 at other scales.  Ironically, the 3 at the larger scale aren't a matchline scenario. But more of a turn of the head to focus on another area of the site.

 

Thanks for the reply! Good thought about clipping.  Had slipped my mind.

 

Thanks

Kevin

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.