Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
PDF files in Civil 3D 2008 everything looks fine in Preview. When you open the actual file the tops are cut off of all the drawings. We are having to open drawings in 2007 to make PDF files. What a pain. Has anyone else had this problem and found a solution?
Check the Printing newsgroup. I've heard mention there that you can copy
over the PDF driver from R2007 to R2008 and that resolves the problem.
John
wrote in message news:5618252@discussion.autodesk.com...
PDF files in Civil 3D 2008 everything looks fine in Preview. When you open
the actual file the tops are cut off of all the drawings. We are having to
open drawings in 2007 to make PDF files. What a pain. Has anyone else had
this problem and found a solution?
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")