Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Part Builder - Structure Height problems

1 REPLY 1
Reply
Message 1 of 2
corcad
1147 Views, 1 Reply

Part Builder - Structure Height problems

Hello All,

 

I am in need of some guidance. I am trying to make a 2-tiered eccentric manhole. This is very similar to an OOTB part called "Eccentric Cylindrical 2-Tier Circular Frame SI". I decided to simply modify that part to my own specs. These are the changes I made to it:

 

  • Changed the cone height to 0.0001m (my part does not need this)
  • Changed the frame height to 0.0001m (my part does not need this)
  • Change the inner structure diameters in the list
  • Changed the wall and floor thicknesses
  • Changed the frame and cone top diameter
  • Changed the barrel height to a list
  • Changed the barrel diameter to a list

After all these changes were made I ended up breaking the thing. I have found that the barrel height does not stay put. If I change the barrel height in structure properties it will not change and if a connected pipe changes then the barrel height reverts to something different. I have also found that changes to connected pipe do not reflect in the structure. If I drop a pipe invert the bottom of the structure does not follow. I've attached my DWG and XML for anyone who can help me out. Any ideas?

 

Matthew Corbin

 

BTW: Files are AutoCAD Civil 3D 2011 (metric)

1 REPLY 1
Message 2 of 2
corcad
in reply to: corcad

Bueller

 

Bueller

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report