Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
On concave arcs, is there a way to auto design & have the specified width determined at either the front or rear lot, whichever is more stringent? ie....when I specify the front for the parcel design it respects the frontage at the front & does not take into consideration that the rear lot line is offset on the concave side of the arc, therefore the width at the rear is not achieved. I know that I can specify the frontage at the rear but it doesn't help when you have reverse curves.
Not at the moment. On 1/7/2005 Dave Simeone began a thread titled "Parcel
Layout - Using offset from ROW?". Here he requested input for different
criteria for lot layout.
Angel Espinoza
KETIV Technologies
wrote in message news:4860760@discussion.autodesk.com...
On concave arcs, is there a way to auto design & have the specified width
determined at either the front or rear lot, whichever is more stringent?
ie....when I specify the front for the parcel design it respects the
frontage at the front & does not take into consideration that the rear lot
line is offset on the concave side of the arc, therefore the width at the
rear is not achieved. I know that I can specify the frontage at the rear but
it doesn't help when you have reverse curves.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")