AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
*Expert Elite*
Joe-Bouza
Posts: 5,189
Registered: ‎12-15-2008
Message 1 of 9 (286 Views)
Accepted Solution

Parcel subdivide display interior and outer boundary

286 Views, 8 Replies
11-14-2013 05:17 AM

I should be able to figure this out by now but how I subivide and get the interior lot lines dito not show over the outter lot? I don't do a lot of parcel work just trying to make it easy for the others

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS

Parcel Display Order...make sure the Site Parcel Style uses a different style than the interior lots, the under the Site/Parcel properties adjust the display order.

Parcel display order.png

In the Prospector, expand Sites, site name, right-click on Parcels and select Properties.  There is a Parcel Display Order on the Composition tab.

*Expert Elite*
wfberry
Posts: 1,939
Registered: ‎09-05-2006
Message 2 of 9 (283 Views)

Re: Parcel subdivide display interior and outer boundary

11-14-2013 05:25 AM in reply to: Joe-Bouza

Joseph:

 

Due to your unique method of prose,:smileywink: I may have a little need for further explanation.  If parcels are done properly there are no overlapping lines.  Perhaps I misunderstood.

 

Bill

 

*Expert Elite*
Joe-Bouza
Posts: 5,189
Registered: ‎12-15-2008
Message 3 of 9 (277 Views)

Re: Parcel subdivide display interior and outer boundary

11-14-2013 06:13 AM in reply to: wfberry
I'll be right back
Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
*Expert Elite*
Jeff_M
Posts: 4,521
Registered: ‎07-22-2003
Message 4 of 9 (275 Views)

Re: Parcel subdivide display interior and outer boundary

11-14-2013 06:17 AM in reply to: Joe-Bouza

Parcel Display Order...make sure the Site Parcel Style uses a different style than the interior lots, the under the Site/Parcel properties adjust the display order.

Parcel display order.png

Jeff_M, also a frequent Swamper
*Expert Elite*
TRogers
Posts: 1,390
Registered: ‎09-05-2007
Message 5 of 9 (274 Views)

Re: Parcel subdivide display interior and outer boundary

11-14-2013 06:17 AM in reply to: Joe-Bouza

In the Prospector, expand Sites, site name, right-click on Parcels and select Properties.  There is a Parcel Display Order on the Composition tab.

If the issue was resolved by this method, please click on "Accept As Solution"
*Civil 3DJ*
Todd Rogers

Visit my blog here.

     
*Expert Elite*
TRogers
Posts: 1,390
Registered: ‎09-05-2007
Message 6 of 9 (257 Views)

Re: Parcel subdivide display interior and outer boundary

11-14-2013 06:28 AM in reply to: Joe-Bouza

Ha, sorry Jeff.  You beat me to the post!

If the issue was resolved by this method, please click on "Accept As Solution"
*Civil 3DJ*
Todd Rogers

Visit my blog here.

     
*Expert Elite*
Joe-Bouza
Posts: 5,189
Registered: ‎12-15-2008
Message 7 of 9 (256 Views)

Re: Parcel subdivide display interior and outer boundary

11-14-2013 06:29 AM in reply to: wfberry
The misplace "dito" really threw you off you game, :smileyhappy:
Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
*Expert Elite*
Joe-Bouza
Posts: 5,189
Registered: ‎12-15-2008
Message 8 of 9 (253 Views)

Re: Parcel subdivide display interior and outer boundary

11-14-2013 06:31 AM in reply to: TRogers
I spread the kudos around Todd. :smileyhappy:

That was the button I couldn't find
Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
*Expert Elite*
TRogers
Posts: 1,390
Registered: ‎09-05-2007
Message 9 of 9 (252 Views)

Re: Parcel subdivide display interior and outer boundary

11-14-2013 06:32 AM in reply to: Joe-Bouza

Thanks Joe!!

If the issue was resolved by this method, please click on "Accept As Solution"
*Civil 3DJ*
Todd Rogers

Visit my blog here.

     
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.