AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Active Contributor
gbondoc
Posts: 30
Registered: ‎04-20-2000
Message 1 of 7 (1,057 Views)
Accepted Solution

Parcel Labels COunterclockwise

1057 Views, 6 Replies
01-24-2013 11:28 AM

Currently running C3D 2012 SP2

 

SETTINGS -> PARCEL -> COMMANDS -> AddParcelSegmentLabels -> Default Options, change to COunterclockwise.

 

Anyone get this to work? When adding multiple labels it shows default as <COunterclockwise>: but when I hit enter it labels as CLockwise?!??! If I type in CO it labels properly.  Have to type in CO every time.

 

Also, can someone check if it is fixed in 2013?

Same thing in 2013.

Distinguished Mentor
castled071049
Posts: 823
Registered: ‎11-15-2005
Message 2 of 7 (1,049 Views)

Re: Parcel Labels COunterclockwise

01-24-2013 12:27 PM in reply to: gbondoc

It's not showing the default as COunterclockwise. It's telling you that if you want to make it label COunterclockwise, you need to type in "CO", otherwise it will label it Clockwise. You might check the commands to see if you can change the default setting to counterclockwise. 

*Expert Elite*
troma
Posts: 2,525
Registered: ‎05-21-2008
Message 3 of 7 (1,043 Views)

Re: Parcel Labels COunterclockwise

01-24-2013 12:49 PM in reply to: gbondoc

Possibly  there is a different default setting for single segment and multiple segment?


Credit where credit is due! Give kudos or accept as solution whenever you can.

Active Contributor
gbondoc
Posts: 30
Registered: ‎04-20-2000
Message 4 of 7 (1,036 Views)

Re: Parcel Labels COunterclockwise

01-24-2013 01:14 PM in reply to: castled071049

Not sure you are following my dilema.  Let me try to explain better.  If you change the default to counterclockwise.  When you label, it doesn't label them counterclockwise even though the default is set to that.  What is the purpose of having a default setting that doesn't stick? 

 

I havent seen a specific setting for single segment vs. multiple.

Valued Mentor
IanMcClain
Posts: 469
Registered: ‎09-29-2008
Message 5 of 7 (1,023 Views)

Re: Parcel Labels COunterclockwise

01-24-2013 01:49 PM in reply to: gbondoc

I'm seeing the same thing. It appears to label clockwise regardless of the default in settings. The only way to get muliple labels coming in counterclockwise is to type CO during the command prompt. Seems like you found a bug.

-Ian McClain
(running C3D 2012 sp4, Win7 64bit, 8GB)
Active Contributor
gbondoc
Posts: 30
Registered: ‎04-20-2000
Message 6 of 7 (1,009 Views)

Re: Parcel Labels COunterclockwise

01-24-2013 02:36 PM in reply to: IanMcClain

Thank you Ian for verifying. Can someone verify if still the same in 2013?

Main reason I'm interested is that I want the labels to default inside the parcels. Just rtying to streamline production. My label styles are set to label above the line/curve.  I would hate to have to go through ALL of our label style to switch them to label below the objects.

*Expert Elite*
Jeff_M
Posts: 4,510
Registered: ‎07-22-2003
Message 7 of 7 (1,005 Views)

Re: Parcel Labels COunterclockwise

01-24-2013 03:29 PM in reply to: gbondoc

Same thing in 2013.

Jeff_M, also a frequent Swamper
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.