Parcel Flip Line

[tremblay]

I have parcel segments with a PL linetype. One of the segments came in upside down. Is there a way to flip this line without actually manually pulling the pickbox's?

[cdubois]

I may be wrong (again) but I believe you are stuck. This is a linetype and cannot be reversed (if you find a way let me know!). It is based on the direction the line was drawn.

[Anonymous]

No problem. Use the Grading tool called Reverse.

--
Matt Kolberg
Global CADD Systems
www.gcscorp.ca


wrote in message news:5982929@discussion.autodesk.com...
I have parcel segments with a PL linetype. One of the segments came in
upside down. Is there a way to flip this line without actually manually
pulling the pickbox's?

[Anonymous]

If you NEED that line to be drawn in that direction (I can't see why you
would) you will have to duplicate your linetype and rotate the text
component 180 degrees.

--
Matt Kolberg
Global CADD Systems
www.gcscorp.ca


wrote in message news:5982929@discussion.autodesk.com...
I have parcel segments with a PL linetype. One of the segments came in
upside down. Is there a way to flip this line without actually manually
pulling the pickbox's?

[tremblay]

The "Reverse" under grading tools don't seem to work on Parcel lines?

Am I doing it wrong?

[Anonymous]

It worked for me. Are you using 2009? I am.

--
Matt Kolberg
Global CADD Systems
www.gcscorp.ca


wrote in message news:5983097@discussion.autodesk.com...
The "Reverse" under grading tools don't seem to work on Parcel lines?

Am I doing it wrong?

[tremblay]

2008 (Ugh)

[Joel Herzberg]

I had this problem all the time till I found this LISP now I use it all the time it works great.

http://www.turvill.com/t2/free_stuff/index.htm

Download the plrev.lsp

Then go to your program files on your c: drive

open Civil 3D 2009
open Support
in the Support folder open the acad2009doc.lsp

Enter this at the every bottom. Then when you need to do a Poly line reverse you just type plrev in the command line and pick the object.

(princ "loaded.")

;; Silent load.
(princ)
(load "plrev")

[thansen4]

To flip a parcel line (which is what I came here for), select the line, right click and click elevation editor. In the dialog box that opens there is a tool called "reverse the direction." 

I used this so that my bearing in my parcel line table matched that of my legal description.

Talmage Hansen

Civil 3D 2013