New issue: When I change the scale list (SCALELISTEDIT) the changes don't stay put. Shut down AutoCAD and restart and the changes are gone.
Looking in the registry,
HKEY_USERS\S-1-5-21-2333945083-3760095292-1795146560-1004
\Software\Autodesk\AutoCAD
under the 17.1 folder, the scale list is not what Civil3D is showing me when I use SCALELISTEDIT. (2008=Rev17.1?)
Here is the registry content:-
"00.ScaleName"="1:1"
"00.ScaleNumber"="1.0"
"00.ScalePerUnits"="1.0"
"01.ScaleName"="1:2"
"01.ScaleNumber"="1.0"
"01.ScalePerUnits"="2.0"
"02.ScaleName"="1:2.5"
"02.ScaleNumber"="1.0"
"02.ScalePerUnits"="2.5"
"03.ScaleName"="1:5"
"03.ScaleNumber"="1.0"
"03.ScalePerUnits"="5.0"
"04.ScaleName"="1:7.5"
"04.ScaleNumber"="1.0"
"04.ScalePerUnits"="7.5"
"05.ScaleName"="1:10"
"05.ScaleNumber"="1.0"
"05.ScalePerUnits"="10.0"
"06.ScaleName"="1:20"
"06.ScaleNumber"="1.0"
"06.ScalePerUnits"="20.0"
"07.ScaleName"="1:25"
"07.ScaleNumber"="1.0"
"07.ScalePerUnits"="25.0"
"08.ScaleName"="1:50"
"08.ScaleNumber"="1.0"
"08.ScalePerUnits"="50.0"
"09.ScaleName"="1:75"
"09.ScaleNumber"="1.0"
"09.ScalePerUnits"="75.0"
"10.ScaleName"="1:100"
"10.ScaleNumber"="1.0"
"10.ScalePerUnits"="100.0"
"11.ScaleName"="1:125"
"11.ScaleNumber"="1.0"
"11.ScalePerUnits"="125.0"
"12.ScaleName"="1:150"
"12.ScaleNumber"="1.0"
"12.ScalePerUnits"="150.0"
"13.ScaleName"="1:200"
"13.ScaleNumber"="1.0"
"13.ScalePerUnits"="200.0"
"14.ScaleName"="1:250"
"14.ScaleNumber"="1.0"
"14.ScalePerUnits"="250.0"
"15.ScaleName"="1:300"
"15.ScaleNumber"="1.0"
"15.ScalePerUnits"="300.0"
"16.ScaleName"="1:500"
"16.ScaleNumber"="1.0"
"16.ScalePerUnits"="500.0"
"17.ScaleName"="1:750"
"17.ScaleNumber"="1.0"
"17.ScalePerUnits"="750.0"
"18.ScaleName"="1:1000"
"18.ScaleNumber"="1.0"
"18.ScalePerUnits"="1000.0"
"19.ScaleName"="1:1250"
"19.ScaleNumber"="1.0"
"19.ScalePerUnits"="1250.0"
"20.ScaleName"="1:2000"
"20.ScaleNumber"="1.0"
"20.ScalePerUnits"="2000.0"
"21.ScaleName"="1:2500"
"21.ScaleNumber"="1.0"
"21.ScalePerUnits"="2500.0"
"22.ScaleName"="1:5000"
"22.ScaleNumber"="1.0"
"22.ScalePerUnits"="5000.0"
Attached is a jpg (yes Laurie, it's only 25K) of what I get in SCALELISTEDIT
I have no idea where the 1:500000 scale comes from, I didn't put it there. Nor have I ever edited the registry content.
We have a set of legally allowed scales for cadastral work which I'm trying to set up on all workstations, that's why this is an issue for me.