AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
*Expert Elite*
Joe-Bouza
Posts: 5,188
Registered: ‎12-15-2008
Message 1 of 14 (274 Views)
Accepted Solution

Offset Alignment from widening

274 Views, 13 Replies
08-05-2013 06:50 AM

I have created a widening then created an 11-foot offset from the widening for some reason I cannot create a 22-foot offset or an d11-foot from the first offset. I can go as high as 22.5 but no more. There are no curves in the alignment only linear tapers. Any ideas why I cant get to 22-feet?

 

offset.PNG

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS

Would any of those linear tapers be reduced to a zero length in an offset operation?

Mentor
john.mckenzie
Posts: 224
Registered: ‎12-19-2006
Message 2 of 14 (272 Views)

Re: Offset Alignment from widening

08-05-2013 07:02 AM in reply to: Joe-Bouza

any errors reported?

 

*Expert Elite*
Joe-Bouza
Posts: 5,188
Registered: ‎12-15-2008
Message 3 of 14 (270 Views)

Re: Offset Alignment from widening

08-05-2013 07:05 AM in reply to: john.mckenzie
Nothing.
Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
Mentor
john.mckenzie
Posts: 224
Registered: ‎12-19-2006
Message 4 of 14 (269 Views)

Re: Offset Alignment from widening

08-05-2013 07:07 AM in reply to: john.mckenzie

the first thing that comes to mind is that one of the user specified inputs causes a condition that cannot be solved at the offset requested. is there a way for you to check this other than tweaking them a bit and seeing what happens.

 

I do not have a bunch of experience with tapers and widenings so I am reaching a bit here. Just thought I might think out loud for a bit and maybe you would have a light bulb moment.

*Expert Elite*
wfberry
Posts: 1,936
Registered: ‎09-05-2006
Message 5 of 14 (265 Views)

Re: Offset Alignment from widening

08-05-2013 07:09 AM in reply to: john.mckenzie

Let's face, sometimes Joe's generator needs an extra cord of wood.

 

:smileyvery-happy:

 

Bil

*Expert Elite*
Joe-Bouza
Posts: 5,188
Registered: ‎12-15-2008
Message 6 of 14 (263 Views)

Re: Offset Alignment from widening

08-05-2013 07:11 AM in reply to: john.mckenzie
I don't have much experience with them either. I thought the out going taper (which I am hiding for lack of need) may too short to solve the offset but I tried extending and still no offset.
Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
*Expert Elite*
Joe-Bouza
Posts: 5,188
Registered: ‎12-15-2008
Message 7 of 14 (262 Views)

Re: Offset Alignment from widening

08-05-2013 07:12 AM in reply to: wfberry
Yeah but after Sandy we have lots and lots of wood to burn
Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
*Expert Elite*
jmayo
Posts: 3,030
Registered: ‎11-13-2006
Message 8 of 14 (254 Views)

Re: Offset Alignment from widening

08-05-2013 07:16 AM in reply to: Joe-Bouza

Would any of those linear tapers be reduced to a zero length in an offset operation?

John Mayo, PE
IDSP 2014
Win 7 64, Xeon ES165@3.2Ghz,
64 GB RAM, Quadro K4000 (x2)
*Expert Elite*
Joe-Bouza
Posts: 5,188
Registered: ‎12-15-2008
Message 9 of 14 (252 Views)

Re: Offset Alignment from widening

08-05-2013 07:18 AM in reply to: jmayo
Possible
Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
*Expert Elite*
Joe-Bouza
Posts: 5,188
Registered: ‎12-15-2008
Message 10 of 14 (249 Views)

Re: Offset Alignment from widening

08-05-2013 07:21 AM in reply to: jmayo
Good job <G>
Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.