I have a road construction ahead sign where I have hatched the background orange (color 30) as a mask since I am using an airphoto for the drawing background. The block is fine until I try to use it in a multileader, then the hatch color switches to block and I can't read the text. The block was created on the same layer as it is inserted. How do I get the orange hatch to show as orange in the multileader block? See the attached screen shot.
The problem has something to with going to a layout. The multileader looks fine in the model tab, but in a layout, both in paperspace and model space the hatch changes color to solid black. It also has to do with the plot styles because when I turn off display plot styles, the colors are fine on the screen. I tried selecting one that I am sure plots color, the none, and the default acad.ctb and all of them show up black on the screen. I tried printing it to PDF, and it prints in color, so I have a bit of a workaround, but I would like to see what I am working with. Any thoughts?
What if you use a truecolor instead of ACI color 30?
It sounds like your STB/CTB is mapping color 30 to a black "pen".
Truecolors are not affected by plot styles.
True colors didn't work. It is an issue with display, and the multileader uses the block without any modifications, so I don't understand why the block is fine but the multileader isn't. If it were a problem with the CTB files, I would expect the problem to affect the block and the multileaders, and the plots. The problem is only with multileaders in a layout tab on the screen.
I guess I have found a bug. Thanks for your help.\
Happy New Year!
Have you tried editing the block and explicitly sending the hatch to the back? Making the block dynamic with the leader in it may also avert the display issue?
Access a broad range of knowledge to help get the most out of your products and services.
Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.
Upgrading to a 2015 product? Make sure to check these out 1st!