AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Active Member
bidoust
Posts: 7
Registered: ‎08-31-2011
Message 1 of 10 (212 Views)
Accepted Solution

Maybe an Assembly Probelm

212 Views, 9 Replies
08-31-2011 10:54 PM

Please see My Attachment ... I Want create my profile view like this view ... but  I don't know how to create those parts that I have mentioned in the picture ...

I'm partial to this solution: http://blog.civil3dreminders.com/2010/12/custom-bench-subassembly-updated.html

 

It is a custom made subassembly that will do the benching and allow for the use of profiles as targets.

 

Christopher

http://blog.civil3dreminders.com/

They do have one, it's called daylight bench. Chris pointed you to one that has some additional functionality.

So Daylighte bench is a subassembly ? ... or we define it in corridor properties ? ...

Active Member
bidoust
Posts: 7
Registered: ‎08-31-2011
Message 2 of 10 (205 Views)

Re: Maybe an Assembly Probelm

09-01-2011 01:22 AM in reply to: bidoust

Please someone help me ... :smileysad:

*Expert Elite*
mathewk
Posts: 2,793
Registered: ‎07-09-2003
Message 3 of 10 (202 Views)

Re: Maybe an Assembly Probelm

09-01-2011 01:55 AM in reply to: bidoust
What? You waited 3 hours and nobody replied yet? Patience! Especially if you're in the western hemisphere.

By "profile view" I assume you mean "section view".
Matt Kolberg
Cansel - Autodesk Division
http://www.cansel.ca/
Active Member
bidoust
Posts: 7
Registered: ‎08-31-2011
Message 4 of 10 (197 Views)

Re: Maybe an Assembly Probelm

09-01-2011 02:14 AM in reply to: mathewk

Oops ... Yes that is section view ... I'm from east ... and I'm in a hurry ... is that so hard to solve it ? ....

*Pro
dgordon
Posts: 1,474
Registered: ‎12-14-2006
Message 5 of 10 (188 Views)

Re: Maybe an Assembly Probelm

09-01-2011 06:03 AM in reply to: bidoust

bidoust,

 

looks like some form of terracing.

 

are you looking for subassemblies to use in combination with a profile to generate a corridor?

 

those flat areas could be a set distance from the road and a set elevation or they could be targeted to alignments if they are not a set distance from the road.   those terrace alignments could also have profiles associated with them to control the elevations if they are not a set height above centerline.   they could be modeled with basic lane and or basic lane transition.  there is a generic multi sub which could be used.    there are also subs with multiple levels of hma and subbase.   It all depends on what the sections are for and what you plan to do with them.

 

 

Dan

Civil 3D 2013
Win 7 Pro x64
Intel Xeon 2.0GHz
12Gb Ram
ATI Firepro 4800
Dell T5500
www.preinnewhof.com
Distinguished Mentor
Civil3DReminders
Posts: 910
Registered: ‎03-24-2009
Message 6 of 10 (164 Views)

Re: Maybe an Assembly Probelm

09-01-2011 11:02 PM in reply to: bidoust

I'm partial to this solution: http://blog.civil3dreminders.com/2010/12/custom-bench-subassembly-updated.html

 

It is a custom made subassembly that will do the benching and allow for the use of profiles as targets.

 

Christopher

http://blog.civil3dreminders.com/

Active Member
bidoust
Posts: 7
Registered: ‎08-31-2011
Message 7 of 10 (153 Views)

Re: Maybe an Assembly Probelm

09-02-2011 03:43 AM in reply to: Civil3DReminders

Yes ... This is My answer ... so Autodesk doesen't provide this subbassembly in Civil 3D ... but I can do this in Land 2009 ... Shame on Autodesk ...

*Expert Elite*
mathewk
Posts: 2,793
Registered: ‎07-09-2003
Message 8 of 10 (144 Views)

Re: Maybe an Assembly Probelm

09-02-2011 07:08 AM in reply to: bidoust
They do have one, it's called daylight bench. Chris pointed you to one that has some additional functionality.
Matt Kolberg
Cansel - Autodesk Division
http://www.cansel.ca/
Active Member
bidoust
Posts: 7
Registered: ‎08-31-2011
Message 9 of 10 (120 Views)

Re: Maybe an Assembly Probelm

09-02-2011 11:45 AM in reply to: mathewk

So Daylighte bench is a subassembly ? ... or we define it in corridor properties ? ...

Active Member
bidoust
Posts: 7
Registered: ‎08-31-2011
Message 10 of 10 (113 Views)

Re: Maybe an Assembly Probelm

09-02-2011 12:14 PM in reply to: mathewk

Oh ... I found That ... what a big mistake x_x ... 

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.