Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
match frequencies of corridor with curb return baseline
match frequencies of corridor with curb return baseline
hello,
I have a corridor which was created using intersection wizard. Is it possible to match frequence of corridor links which are going along two different curb returns?
grip the corridor >>RC>>modify region >> match paramteters
Joe Bouza Did you find this post helpful? Feel free to Like this post. Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
and nothing happens. Probably I have beem misunderstood, thus I will try to repeat my question. I need that the links of corridors along both curb returns would meet at the same point on secondary road alignment. this would give me a much better surface.
In the Corridor Properties / Frequency you can click on the plus sign at the bottom to add additional stations, and the click on the end of your main road assembly.
BStewart Intel Corei7 975 3.33Ghz 24 GB Ram Nvidea GeForce GTX 260 Windows 7 Pro 64 Bit Civil 3D 2013 64 bit
grip the corridor>> ribbon>> add section>> pick the intersetion point
Joe Bouza Did you find this post helpful? Feel free to Like this post. Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
yes, but is there a smarter way to do it, because now I can only add sections manually. It might be a solution, but unfortunately I cannot delele sections which I do not need, I can only delete sections which I added before.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")