AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
*Srayos Endbringer
Message 1 of 2 (910 Views)

LinkToMarkedPoint and Offset Assemblies

910 Views, 1 Replies
06-01-2010 08:26 AM
I better do this before the end of the week when Autodesk gets rid of
the newsgroups.

Is it possible to have a link go from a point on a regular assembly to a
marked point on an offset assembly? I have a ditch that is next to a
sidewalk that I want to connect together. The ditch is not parallel to
the sidewalk, so I used an offset assembly figuring that was the best
way to go. But now I can't get the LinkToMarkedPoint or
LinkToMarkedPoint2 to work. Because the marked point is on the offset
assembly, under the Construction tab of the assembly I cannot make sure
the LinkToMarkedPoint2 is below the Marked Point.

Attached are some screen shots of what I'm trying to do.

EB
-----------------------
Win7 Pro 64-bit
Civil 3D 2011 64-bit
6GB RAM
*Srayos Endbringer
Message 2 of 2 (910 Views)

Re: LinkToMarkedPoint and Offset Assemblies

06-01-2010 08:44 AM in reply to: *Srayos Endbringer
Ugh, I'm an idiot. I had them backwards. The marked point needed to be
on the sidewalk side and the link from the ditch.

EB
-----------------------
Win7 Pro 64-bit
Civil 3D 2011 64-bit
6GB RAM

On 6/1/2010 11:26 AM, Srayos Endbringer wrote:
> I better do this before the end of the week when Autodesk gets rid of
> the newsgroups.
>
> Is it possible to have a link go from a point on a regular assembly to a
> marked point on an offset assembly? I have a ditch that is next to a
> sidewalk that I want to connect together. The ditch is not parallel to
> the sidewalk, so I used an offset assembly figuring that was the best
> way to go. But now I can't get the LinkToMarkedPoint or
> LinkToMarkedPoint2 to work. Because the marked point is on the offset
> assembly, under the Construction tab of the assembly I cannot make sure
> the LinkToMarkedPoint2 is below the Marked Point.
>
> Attached are some screen shots of what I'm trying to do.
>
> EB
> -----------------------
> Win7 Pro 64-bit
> Civil 3D 2011 64-bit
> 6GB RAM

--
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.