I took drawing 1 and set it up like I want it. I then copied the layout and pasted it to drawing 2. I then copied and pasted the legend from the model space of drawing 1 to the model space of drawing 2. I noticed that drawing 2 line spacing is different like ltscale so I check the drawing scale, the viewport scales, and everything else I can think of, but all the numbers look the same, but my linework isn't.
Does anyone havve any pointers for me?
Solved! Go to Solution.
Solved by Jay_B. Go to Solution.
LTSCALE
MSLTSCALE
PSLTSCALE
REGENALL
?
Mark Green
Working on Civil 3D in Canada
Are all these values set to 1 in both drawings?
LTSCALE=1
MSLTSCALE=1
PSLTSCALE=1
I don't know if it was the msltsclae or the psltscale, but that fixed it. The ltscale was correct already.
thanks