Jason Hickey wrote:
Works fine in 2006 as well. I did the exact same thing, with these
results:
Select lines, arcs, or polylines to convert into parcels: Specify opposite
corner: 5 found
Select lines, arcs, or polylines to convert into parcels:
Command:
Command: *Cancel*
Command: li
LIST
Select objects: 1 found
Select objects:
AECC_PARCEL_SEGMENT Layer: "C-PROP-LINE"
Space: Model space
Handle = 159c
Site : Site 1
Start : North: 3656900.9000' East: 11790223.6400'
Segment #1 : Line
Course: NORTH74.030707EAST (d) Length: 673.5009'
North: 3657086.1950' East: 11790871.1500'
Same goes for arcs:
Select lines, arcs, or polylines to convert into parcels: Specify opposite
corner: 6 found
Select lines, arcs, or polylines to convert into parcels:
Command:
Command: li
LIST 1 found
AECC_PARCEL_SEGMENT Layer: "C-PROP-LINE"
Space: Model space
Handle = 15b1
Site : Site 1
Start : North: 3656711.1477' East: 11790260.8696'
Segment #1 : Curve
Length: 1047.7025' Radius: 500.0000'
Delta: 120.0579 (d) Tangent: 867.0362'
Chord: 866.2778' Course: SOUTH71.129413EAST (d)
Course In: NORTH78.899519EAST (d) Course Out: SOUTH41.158346EAST (d)
RP North: 3656807.4128' East: 11790751.5151'
End North: 3656430.9660' East: 11791080.5862'
--
Jason Hickey
http://beneaththelines.blogspot.com