AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
New Member
forrest16
Posts: 2
Registered: ‎11-13-2012
Message 1 of 5 (242 Views)

Layer problem

242 Views, 4 Replies
11-13-2012 11:55 AM

In model space if i go to layers manager and turn off a layer why does it still show up in model space.  Civil 3d 2013

Distinguished Contributor
sadkuh
Posts: 175
Registered: ‎03-04-2008
Message 2 of 5 (235 Views)

Re: Layer problem

11-13-2012 12:21 PM in reply to: forrest16

If you do a  REGEN, does the layer become visable? If so, check your REGENAUTO setting, it may be turned off. 

New Member
forrest16
Posts: 2
Registered: ‎11-13-2012
Message 3 of 5 (230 Views)

Re: Layer problem

11-13-2012 12:28 PM in reply to: forrest16

my regen auto is on.  but my problem is when i turn a layer off it still shows in model space.  if i freeze the layer then it turns off but if i simply turn the layer off it is still visible.

*Expert Elite*
troma
Posts: 2,525
Registered: ‎05-21-2008
Message 4 of 5 (207 Views)

Re: Layer problem

11-13-2012 01:40 PM in reply to: forrest16

There is a setting for layers that are off to either not display, or lock and fade.  Is it doing the lock and fade for you?


Credit where credit is due! Give kudos or accept as solution whenever you can.

*Expert Elite*
Joe-Bouza
Posts: 5,189
Registered: ‎12-15-2008
Message 5 of 5 (189 Views)

Re: Layer problem

11-13-2012 03:09 PM in reply to: forrest16

If the components of the object are on different layers turning off the insert layer would not turn off the component layer.

 

Example:

 

default layer for point insert = V-node

marker style layer  = c-topo-spot

label style layer = V-node-text

 

turn "off" v-node and the point and label style remain. freeze v-node they all go.

 

Think of c3d ojects as nested blocks made of components on thier own layers and it has a singular insert point

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.