OK, by my best calculation I have a boundary survey that is going to be approximately 80 sheet give or take and Im look for options on setup. I have looked at using SSM and also looked at setting up the boundary like an alignment and running plan only sheets using the Plan Production feature, which would make the matchlines for me (kind of nice there) and would proabably save me some time. I would appreciate any insite on this for everyone, as I personally have not used Plan Production in quite some time (probably 2008) and with something of this size and nature I really dont what to create the layouts in one drawing, and was honestly thinking of limiting it to around 10 layouts per drawing.
TIA
Rick Jackson
Survey CAD Technician VI
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
RL,
80 sheets? Are you doing a boundary of the entire United States of America?
Dave
Dave Stoll
Las Vegas, Nevada
Rick Jackson
Survey CAD Technician VI
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Will the sheets cover the entire project area or just the boundary/roads?
If it coveres the entire project, check out the Map Book tools. I haven't read through it myself but it looks like Murph has a decent write up on Map Books HERE. And if Murph wrote it, it's bound to be good.
Rick Jackson
Survey CAD Technician VI
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
neilyj (No connection with Autodesk other than using the products in the real world)
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.