Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Labeling Station Range of Assemblies Used in Corridor in Model Space

3 REPLIES 3
SOLVED
Reply
Message 1 of 4
Grimes_MG
396 Views, 3 Replies

Labeling Station Range of Assemblies Used in Corridor in Model Space

Anyone been able to figure out how to have C3D provide the Station range informaiton of each of the assemblies used in a Corridor? I'd like to have the information shown in the Prospector (Name of Assembly, Region, Station Start and End) show in model space next to each assembly. This would be particularly useful when providing Typical Sections on plans. Thanks.

Win7 (x64), EVGA 790i, 8GB RAM, EVGA 8800GT, 250 GB iSSHDD, & RAID 0/1
3 REPLIES 3
Message 2 of 4
Joe-Bouza
in reply to: Grimes_MG

I'm guessing you are looking for something other than naming the assembly such as.

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People)

HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win10 OS
Message 3 of 4
Joe-Bouza
in reply to: Grimes_MG

Not sure if you know about this technique:
http://www.youtube.com/watch?v=aDkz0T_cvKg
Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People)

HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win10 OS
Message 4 of 4
Grimes_MG
in reply to: Joe-Bouza

Thanks Joe, that's what I was looking for and I'll see if it will also provide the Station Begin and End properties. I always forget about the MTEXT variables for some reason.

Win7 (x64), EVGA 790i, 8GB RAM, EVGA 8800GT, 250 GB iSSHDD, & RAID 0/1

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report