AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
*Expert Elite*
Jeff_M
Posts: 4,449
Registered: ‎07-22-2003
Message 21 of 24 (100 Views)

Re: Labeling a Line with multiple segments as one segment?

09-19-2012 09:05 AM in reply to: jmayo

johnm wrote:

 

2013 will fix it 


Well, unless if you ever label curves. :-)

 

Also, this method works well for getting alignments, property lines, and curbs labeled with tags to all be shown in the same Curve/Line tables. Instead of 1 table for alignment data and another for all others.

Jeff_M, also a frequent Swamper
Active Member
AWesterlund
Posts: 10
Registered: ‎09-05-2012
Message 22 of 24 (95 Views)

Re: Labeling a Line with multiple segments as one segment?

09-19-2012 11:14 AM in reply to: Jeff_M

Moving on C3D, anyone now how to use a created text style for labels?  Or change the Oblique Angle? That's really all I need.

 

Thanks

*Expert Elite*
jmayo
Posts: 2,946
Registered: ‎11-13-2006
Message 23 of 24 (91 Views)

Re: Labeling a Line with multiple segments as one segment?

09-19-2012 11:28 AM in reply to: Jeff_M

Absolutly Jeff. That is a nice improvement. I'd bet something is in the works for curves.

John Mayo, PE
IDSP 2014
Win 7 64, Xeon ES165@3.2Ghz,
64 GB RAM, Quadro K4000 (x2)
*Expert Elite*
Jeff_M
Posts: 4,449
Registered: ‎07-22-2003
Message 24 of 24 (84 Views)

Re: Labeling a Line with multiple segments as one segment?

09-19-2012 01:28 PM in reply to: AWesterlund

AWesterlund wrote:

Moving on C3D, anyone now how to use a created text style for labels?  Or change the Oblique Angle? That's really all I need.

 

Thanks


The Label styles are assigned a Text Style on the General tab of the style editor dialog. The text style controls the font used and the obliquing angle, but the height is controlled by the height entered on the Layout tab for each Text component. The font and oblique settings may be overridden on the Format tab of the Text Component editor, just like MText objects can be altered from their base Text Style.

Jeff_M, also a frequent Swamper
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.