Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I need some help on a label style. I have several polylines (shown). When I label them, instead of labeling the length of that particular line I get every length of touching polylines. I would like to know how can I label the section with the 2 arcs and not instersecting sections.
Not sure what version you are using, but 2013 you can create a label by picking 2 points. This can also be done using parcels with a span outside segment parcel label. You could also draw a seperate polyline over top the existing line the whole distance you want to label.
Steve Goessling Land Consultants Civil3D 2015 Windows 7, 64 bit Intel i7 2600 @ 3.40Ghz 16 GB RAM Nvidia Quadro 600
