AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
*Expert Elite*
4,055 Posts
343 Kudos
Registered: ‎08-01-2008
Post 1 of 2
Accepted Solution

Junction Profile Locking

674 Views, 1 Replies
01-23-2014 08:48 AM

Getting this message about profile locking and not sure why but the junction is at 0 elevation.

 

Any ideas how to overcome it - I have created the profiles as I always do and one of junctions in my model are causing issues but most are fine.

 

Thanks

neilyj
(No connection with Autodesk other than using the products in the real world)


IDSP Premium 2015 (mainly Civil 3D 2015 UKIE & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 500Gb SSD, 1Tb HDD
32Gb Ram Intel Xeon CPU E5-2650 v2 @ 2.6GHz (32 CPUs), ~2.6GHz
NVIDIA Quadro K4000, Dual 27" Monitor, Dell T5610

Seems the solution was to ensure that there was only one design profile....some profiles had several versions but all was fine when I deleted the extra versions

 

2014-01-24 15_46_42-Toolspace.jpg

*Expert Elite*
4,055 Posts
343 Kudos
Registered: ‎08-01-2008
Post 2 of 2

Re: Junction Profile Locking

01-24-2014 07:51 AM in reply to: neilyj

Seems the solution was to ensure that there was only one design profile....some profiles had several versions but all was fine when I deleted the extra versions

 

2014-01-24 15_46_42-Toolspace.jpg

neilyj
(No connection with Autodesk other than using the products in the real world)


IDSP Premium 2015 (mainly Civil 3D 2015 UKIE & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 500Gb SSD, 1Tb HDD
32Gb Ram Intel Xeon CPU E5-2650 v2 @ 2.6GHz (32 CPUs), ~2.6GHz
NVIDIA Quadro K4000, Dual 27" Monitor, Dell T5610
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are you interested in helping shape the future of the Autodesk Community? To participate in this brief usability study, please click here. Your time and input is greatly appreciated!