AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
*Expert Elite*
neilyj
Posts: 3,926
Registered: ‎08-01-2008
Message 1 of 2 (651 Views)
Accepted Solution

Junction Profile Locking

651 Views, 1 Replies
01-23-2014 08:48 AM

Getting this message about profile locking and not sure why but the junction is at 0 elevation.

 

Any ideas how to overcome it - I have created the profiles as I always do and one of junctions in my model are causing issues but most are fine.

 

Thanks

neilyj
(No connection with Autodesk other than using the products in the real world)


IDSP Premium 2015 (mainly Civil 3D 2015 UKIE & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 500Gb SSD, 1Tb HDD
32Gb Ram Intel Xeon CPU E5-2650 v2 @ 2.6GHz (32 CPUs), ~2.6GHz
NVIDIA Quadro K4000, Dual 27" Monitor, Dell T5610

Seems the solution was to ensure that there was only one design profile....some profiles had several versions but all was fine when I deleted the extra versions

 

2014-01-24 15_46_42-Toolspace.jpg

*Expert Elite*
neilyj
Posts: 3,926
Registered: ‎08-01-2008
Message 2 of 2 (622 Views)

Re: Junction Profile Locking

01-24-2014 07:51 AM in reply to: neilyj

Seems the solution was to ensure that there was only one design profile....some profiles had several versions but all was fine when I deleted the extra versions

 

2014-01-24 15_46_42-Toolspace.jpg

neilyj
(No connection with Autodesk other than using the products in the real world)


IDSP Premium 2015 (mainly Civil 3D 2015 UKIE & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 500Gb SSD, 1Tb HDD
32Gb Ram Intel Xeon CPU E5-2650 v2 @ 2.6GHz (32 CPUs), ~2.6GHz
NVIDIA Quadro K4000, Dual 27" Monitor, Dell T5610
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!