AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Active Member
office
Posts: 9
Registered: ‎05-16-2011
Message 1 of 3 (153 Views)
Accepted Solution

Issue with Structur heigths

153 Views, 2 Replies
12-13-2011 02:41 AM

Hi,

 

when i try to lower the height from an Standard-Catalog-Structure "DACH Metric Structures - DACH Abwasserkanalschächte - AeccStructEccentricCylinder_Metric_Dach" it block at an certain level (1,622m).

 

With a diameter of 1000 mm there are products available with an height rim to cone top of an 1,05 m. why I not able to create this? (doesn't work with similar objekts from the Catalog)

 

I tried to find limits which might be possibly set in the Component-Builder, but found non.

 

Win7 64bit
HP z400 Workstation
ATI FirePro V4800
C3D2013

Please correct me, but this is due to the Parameter "Vertical Pipe Clearance" (SVPC), which controls the minimum Height of your Structure, which does not allow to have a Height less than this.

 

The "Vertical Pipe Clearance" is computed by: SVPC = SFH + SCH + SBPC

 

SFH Frame Height (List) 160 or 200 mm
SCH Cone Height (List) 600 mm
SBPC barrel Pipe Clearance (Constants) 600 mm

 

HTH

Product Support
bauerc
Posts: 25
Registered: ‎02-07-2008
Message 2 of 3 (151 Views)

Re: Issue with Structur heigths

12-13-2011 02:56 AM in reply to: office

Please correct me, but this is due to the Parameter "Vertical Pipe Clearance" (SVPC), which controls the minimum Height of your Structure, which does not allow to have a Height less than this.

 

The "Vertical Pipe Clearance" is computed by: SVPC = SFH + SCH + SBPC

 

SFH Frame Height (List) 160 or 200 mm
SCH Cone Height (List) 600 mm
SBPC barrel Pipe Clearance (Constants) 600 mm

 

HTH



Christian Bauer
Active Member
office
Posts: 9
Registered: ‎05-16-2011
Message 3 of 3 (147 Views)

Re: Issue with Structur heigths

12-13-2011 03:54 AM in reply to: bauerc

I tried this already, but it seem to be needed to oversize the element in first place and then switch to gain height by DEM (DGM).

 

Thanks for the quick support.

Win7 64bit
HP z400 Workstation
ATI FirePro V4800
C3D2013
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.